By Rusty,

By the end of a North Florida summer, most lawns have a story to tell. Heat, heavy rain, dry stretches, foot traffic, insects, and irrigation problems can leave grass thin, stressed, or bare in the places that struggled most.

Fall is the time to help your lawn recover. The air begins to cool while the soil stays warm, giving roots a strong growing environment without the pressure of 95-degree afternoons. Depending on what your yard needs, that may mean strengthening the lawn you have, rejuvenating problem areas, or installing new sod where the grass is beyond repair.

Start with what summer revealed

Summer makes weak spots easy to see. Areas that stay soggy after a storm may have drainage problems. Grass that repeatedly dries out may not be getting proper irrigation coverage. Thin turf near walkways or play areas may be dealing with heavy traffic or compacted soil. A patch that never fills in may be getting too much shade for the grass variety.

Before treating the symptoms, identify the cause. Otherwise, the same bare or unhealthy spots are likely to return.

Help the whole lawn recover

A stressed lawn does not always need to be replaced. If most of the turf is still healthy, consistent care can help it rebuild while the grass is still actively growing. Proper mowing, dependable irrigation coverage, and a lawn health program that addresses weeds, insects, and nutrition all support stronger roots and more even growth.

Fall rain can be unpredictable, so check the soil instead of assuming the lawn is getting enough water. At the same time, avoid keeping it constantly wet. The goal is even moisture and deepening roots, not saturated soil.

Rejuvenate thin and worn problem areas

For lawns that are generally healthy but thin, tired, or uneven after summer, topdressing can give existing grass a better place to grow. We spread a thin layer of material over the lawn to improve the soil around the roots and encourage the turf to fill in.

Topdressing is especially useful in areas with minor low spots, weak soil, or worn turf that still has enough healthy grass to recover. Because the soil is warm and the lawn has active growing time left, fall is a strong window for that rejuvenation.

Fix drainage and irrigation before repairing the grass

New growth cannot solve standing water or poor coverage. If part of your yard holds water after a heavy rain, improve the drainage before adding topdressing or sod. If a section stays dry, have the irrigation coverage checked before repairing the turf.

Fall is a practical time to address both issues because summer has already shown you where water collects, where it misses, and which areas struggle first.

When new sod is the right solution

Some areas are too damaged or bare to recover efficiently. When the turf is gone, weeds have taken over, or a larger section needs a fresh start, new sod may be the best answer.

Fall is one of the best times to install St. Augustine or zoysia sod in North Florida. The soil remains warm enough for roots to establish, while cooler air reduces heat stress on grass with a short root system. The lawn may not produce a dramatic burst of top growth, but important work is happening underground.

Roots first, blades later

Sod arrives as a thin layer of grass and soil with short roots. Its first job is to knit into the soil below. Cooler fall weather can slow the growth you see above ground, while roots continue establishing beneath the surface. By spring, that stronger foundation helps the lawn green up and grow.

After a few weeks, gently lift a corner. If it lifts like a rug, the roots have not taken hold yet. If it resists, they are beginning to establish. Keep foot traffic off new sod until it is rooted.

New sod still needs a watering plan

Shallow roots dry out quickly, especially along edges and corners. New sod needs frequent, light watering at first to keep both the sod and the soil beneath it moist. Watering should then taper as the roots take hold. Because rain usually becomes less dependable later in fall, do not count on the weather alone. Our irrigation team can check coverage and set a schedule that fits the grass and the site.

Build the right plan for your lawn

Fall lawn recovery is not one-size-fits-all. One yard may need consistent care and irrigation adjustments. Another may benefit from topdressing in thin areas. A lawn with severe damage may need drainage work followed by new sod.

Let us take a look

Request an estimate and we will walk your lawn with you. We can recommend the right combination of lawn care, topdressing, drainage improvements, irrigation work, and new sod to help your yard recover from summer and head into spring on stronger roots.

close-up-of-st-augustine-grass-lawn-in-fall.png
By Rusty,
If your Zoysia lawn is suffering from dead spots this summer like the photo above, you aren't alone. Although Gainesville lawns have historically been St. Augustine grass, Zoysia has began making a major push as the turf of choice for a few years. With valid and proven claims of chinch bug-resistance and drought tolerance, even strict homeowner's associations like Haile Plantation that previously only allowed St. Augustine lawns have begun to allow Zoysia sod in their neighborhood.    However, it is extremely important to realize how Zoysia grass reacts to drought and what makes it drought-tolerant. It isn't that it needs less water than St. Augustine lawns or that it stays green longer than St. Augustine, either. Actually, it's quite the opposite. Zoysia actually turns brown before St. Augustine when facing drought stress and needs the same amount of water to stay green. The difference is the fact that Zoysia actually lives through the drought whereas St. Augustine will die.    To save you time and reading, a visual presentation (YouTube video) may help make a better explanation.  

That's great information to have. However, now you have brown spots in your Zoysia lawn and you want to know how to get them green again. Here is the approach I use on our client's lawns:

 
  1. INCREASE WATER: If the problem is drought stress, naturally the first step would be to increase the amount of water it's getting and how long it sits on the lawn. Many people will worry about their GRU water bill at this point, but it comes down to asking yourself, "what is more important?" A green vibrant lawn or your water bill? Only you can make that choice. There are several ways to increase the water gettting to your lawn's roots: (here is a tutorial on how to change your Gainesville irrigation timer settings)
    • Increasing the frequency (watering more often)
    • Increasing the duration (minutes that the zones run)
    • Setting back the start time (running earlier in the morning so the water saturated the lawn longer before evaporation by the sun). 
  2. HYDRETAIN - If the heat and drought is affecting your lawn, but the irrigation requirements or GRU bill consideration give you pause to increase your watering, the next step is to use a produsct called Hydretain. It's a product that alows your lawn to retain 50% more water than it currently does and will help your lawn utilize each ounce of water it gets to the fullest. Here is a link to learn about how it works. Long story short, it holds more moisture in the ground when in drought situations to help the grass stay healthy, and it's relatively inexpensive, too. It's only $95-$125 and lasts for 3 months (which is all we really need to make it through summer). 
  3. THATCH - After you see your moisture in your soil increase, rake out the thatch from the dead areas to promote the regeneration of your Gainesville lawn. Currently, that thatch is acting like a mulch and buffer from the heat, helping to hold moisture on the soil longer and keep the soil cooler. But once the lawn starts to regrow, that thatch will actually deter it from rejuvenation. For that reason, after a few weeks of irrigation and hydretain, rake it out.
  4. PEST PREVENTION - Although Zoysia is chinch bug resistant, when it faces drought stress it can get insect damage. Similar to a human's immune system being lowered, Zoysia grass loses it's pest-resistance as it gets more stressed - and that attracts the lawn pests you don't want making your problem worse. Have your lawn sprayed by a licensed lawn pest control company.

Taking those 4 steps should have your lawn rejuvenated in a few weeks. As the green returns and the summer rains get re-started, you can back the irrigation times up and begin fertilizing for the fall. 

If you feel that your irrigation system isn't functioning properly, we would love to schedule a $95 One-Hour Irrigation Tune-up with Mike, our sprinkler technician. If you feel that chinch bugs may be contributing to your brown lawn, schedule a meeting with our lawn pest control technician, Joe. If we can be of help in any way, please call our office at (352) 378-LAWN today, or fill out our online request by clicking the above links. 

By Rusty,

 

St. Augustine is a warm-season turf grass that grows well in coastal areas in southern areas of the U.S. and is a great grass for Gainesville FL sod replacement. Though it requires a little more care than other turf grasses, St. Augustine's thick, matting quality makes it a desirable lawn grass. Laying St. Augustine sod is an in-depth process, with as much preparation labor as installation to have it done correctly. Once the area is prepared and the sod laid, your grass should be ready for mowing in approximately 3-4 weeks, depending upon the Gainesville Landscaping season.

 

Step 1

Clean the area of any weeds or other vegetation before laying the St. Augustine sod. Rake the vegetation from the area, or spray it with an herbicide to kill the weeds. Wait several days for the vegetation to die before watering. Water the area after everything has died, to wash the herbicide from the surface. TMLC uses a sod cutter like they use in the sod farms to cut out approximately 1" of current grass, weeds, roots, and soil and to  ensure that the new Gainesville sod doesn't get laid higher than the rest of the lawn.

Step 2

Rake the area to remove unwanted rocks, sticks, or other debris and to smooth the surface out to be level. Laying the sod on an uneven surface will result in an uneven lawn. This also helps to loosen compacted soil so the roots tap into the soil easier.

Step 3

Sprinkle the bare ground with a low nitrogen natural fertilizer like milorganite, according to the application rates on the package. Work the fertilizer into the soil with a hard rake. This will start the eco process of microorganisms creating organic material to create a natural compost under your new sod so that it turns the florida sand (or clay) into nutrient-rich soil.

Step 4

Mark areas around trees and flowerbeds with a garden marking spray or can of spray paint. This will help you keep the sod out of areas where it is unwanted and keep a neatly defined bed line iwth firm distinction.

Step 5

Begin laying the sod down, starting at a corner. Be sure the sod lies flat upon the ground and that no piece overlaps the piece laid next to it. Kick the piece of sod with your foot to butt it up firmly against the neighboring piece. Make sure all corners are flush. Continue laying each piece of sod until you have the area covered. Some people even prefer to stagger the joints, but this is not neccessary and hasn't been proven scientifically to help the Gainesville Sod Installation process in any way. 

Step 6

Cut sod pieces to fit around curves, trees or flowerbeds, using a machete or other large knife.

Step 7

Water the newly laid sod immediately after installing. Continue keeping the area moist, but not flooded, for the next two weeks by watering daily (unless in heavy shade or sun where frequency may need to be adjusted up or down). Then cut back the watering to 5x, 3x, and 2x per week in weekly increments, depending on your local weather conditions. Drier conditions will need irrigated more oftern whereas rainy conditions may not need water at all.